TUNING LS ECU WITH HP TUNERS INSTALL
TUNING LS ECU WITH HP TUNERS DOWNLOAD

Sorry you guys for me so repetitive with my questions. Therefore, I'd say it is essential that you obtain your actual tune file(s) from your tuner so that you have a reference 'after tune' state that you can always write into the car, should you tweak the tune yourself, have someone else modify it or for some reason need a new module later etc.Īlright, thank you. HP Tuners offers several options to get your E90/E93 ECM-equipped vehicle ready for tuning with an MPVI2, MPVI2+, or MPVI3 interface and the latest version of. When one tries to read it, the process seems to succeed, but you end up with a stock TCM tune file, which is what the warning is about. View Profile View Forum Posts Private Message Tuner Join Date.

TUNING LS ECU WITH HP TUNERS DOWNLOAD

In addition, you need credits for writing, so you can only physically write your car if your tuner used the same MPVI2 device, if you have your own, you'd need to buy credits for your unit first.Īs Josh said, unlike the ECM, the T87A TCM module cannot be read. If you just want a stock tune, go to the HP Tuners repository and download a stock tune to look at 05-15-2016 16. Unless you specifically selected the Write Vehicle item or button and then saw this window, you didn't write anything into your TCM. Writing either the ECM or the TCM takes a relatively long time (minutes), and you see a progress indicator during the process.

I am exhausted so wording is probably trash right now I hope i was able to explain that in a way that at least a little easy to read. The issue is the LS2 has a 24x reluctor wheel and 1x cam gear and my PCM is obviously looking for 58x / 4x wheel/gear signals.

TUNING LS ECU WITH HP TUNERS INSTALL

I just want to make sure that it didnt write anything to it simply by connecting to the car and getting that little message. Today I am fine tuning the MAF on my 2002 Camaro SS. Im looking to install a nicely built LS2 into my 07 Z06. i was just letting vcm editor connect to my car and read my modules and i was given that error message. It has been tuned for my set up, but to the best of my knowledge i havent written anything to m tcm. Unsure if you're asking me if my tcm was just installed or already installed and tuned for my setup. So, make sure you’re naming and saving modified TCM tunes in your laptop, since you’ll never be able to “pull” the modified tune from the TCM. found this tune in the repository,any opinions 001 Chevrolet Silverado Engine: 5. But even if you have a heavily modified tune programmed in, if you try to read it it’ll just come up with the stock file. You save your modified TCM tunes in your laptop, and can flash them in as you make changes.

So HP Tuners will let you read the stock file, but that’s it. You cannot read the TCM! You can only flash to it. I didnt do anything to cause it to do some crap like this i was just loading and reading the module. I am procharged, cammed, and running on e85. Is the message i was given when reading my ecu for the first time in hp tuner vcm editor. If this module has been previously tuned, you will lose any existing changes.' 'The tune file you've just been supplied is a stock file because this control module is not readable.

Tuning ls ecu with hp tuners